Skip to Content
You may also like this products

WHICH QUAD ROLLER SKATE WHEELS TO CHOOSE DEPENDING ON CITY SURFACES?

WHICH QUAD ROLLER SKATE WHEELS TO CHOOSE DEPENDING ON CITY SURFACES?


An 80A to 82A quad roller skate wheel with a 62 mm diameter is the ideal choice for most urban rides. This balance absorbs vibrations from uneven asphalt while maintaining steady speed on bike lanes or smooth sidewalks.


Choosing the exact polyurethane compound depends directly on the roughness of your city's streets and the chassis mounted under your shoes. Each road surface requires a specific pairing between the durometer rating and the tire height compatible with your Flaneurz or Slades Detachable Rolling Parts.


/WHICH QUAD ROLLER SKATE WHEEL HARDNESS TO CHOOSE?


SurfaceHardnessDiameterKey Takeaway
Worn and coarse asphalt78A62 to 64 mmMaximum vibration absorption
Standard and mixed asphalt80A to 82A62 mmUrban versatility and acceleration
Smooth asphalt and quays82A to 85A62 to 64 mmHigh efficiency and low friction
Urban cobblestones78A62 to 64 mmCross at a steady speed
Painted bike lanes80A to 82A62 mmPotential slip on wet paint
Wet ground or light rain78A62 mmMandatory bearing drying
Indoor hardwood and smooth concrete88A to 103A57 to 62 mmZero gravel filtration

This guide applies strictly to traditional quad skates with 4 wheels arranged in a rectangle. Inline skates use narrow 68 to 110 mm wheels that slice over surface irregularities, whereas Quad Roller Skates rely on wide 57 to 65 mm wheels where the softness of the urethane provides all the mechanical shock absorption.


/HARDNESS, DIAMETER, WIDTH: THE 3 CRITERIA OF A QUAD ROLLER SKATE WHEEL


/HARDNESS AND DUROMETER

The durometer measures the resistance of urethane to indentation on the Shore A scale, ranging from 74A for the softest compounds up to 105A for rigid materials. A lower value indicates a soft wheel that compresses slightly under the skater's weight to absorb micro-shocks from the pavement.


Outdoor quad roller skate wheels fall between 78A and 82A.

  • At 78A, comfort comes first on rough asphalt, offering maximum grip in tight turns.
  • At 82A, polyurethane deformation decreases and energy return increases with every push.
  • The 85A tier corresponds to hybrid wheels designed for ultra-smooth urban slabs.
  • Starting at 88A, the urethane enters the indoor category, where hardness reduces friction on synthetic floors or wood.


/DIAMETER: 62 MM OR 64 MM DEPENDING ON YOUR ROLLING PARTS

The diameter of a quad roller skate wheel determines top speed and obstacle-clearing ability.


A 62 mm wheel offers a low center of gravity and snappy acceleration during frequent stops at crosswalks.

A 64 mm wheel carries greater inertia to maintain stride length over long distances and rolls more easily over twigs or expansion joints.


Choosing between 62 mm and 64 mm depends on the clearance available beneath the sole of your Detachable Roller Skates.​


Slades Rolling Parts and the Iconic range accommodate a maximum diameter of 62 mm to preserve clearance between the urethane and the shoe during deep edge leans.

Premium Rolling Parts fitted with Roll Line plates tolerate a 64 mm diameter thanks to a raised axle geometry.
​

/WIDTH AND PROFILE

The contact patch with the ground ranges between 30 mm and 38 mm on a quad roller skate.

A wide tread of 35 to 38 mm stabilizes lateral support and distributes pressure across uneven surfaces.

A narrower width of 31 or 32 mm lightens the wheel and makes quick direction changes and crossovers easier in the city.


The lip profile affects maneuverability. A square lip maximizes grip during powerful pushes and adds security on urban descents. A rounded lip eases lateral transitions and rolls over longitudinal sidewalk seams without catching.


/WHICH QUAD ROLLER SKATE WHEELS IN THE CITY DEPENDING ON YOUR SURFACE?


/SMOOTH ASPHALT: QUAYS AND WIDE AVENUES

Renovated riverbanks and quartz-finished concrete esplanades feature a fine grain that generates very little vibration.


A hardness of 82A or 85A minimizes energy loss caused by urethane compression. Paired with a 62 mm diameter on the Iconic range or 64 mm on the Premium range, this setup maintains a smooth glide with reduced muscular effort over several kilometers.


/STANDARD ASPHALT AND MIXED COMMUTES

A daily commute alternates between newly paved bike lanes and stretches of road worn down by car traffic.


An 80A to 82A rating in 62 mm handles these constant texture changes. The urethane filters out medium-grain tarmac while retaining its responsiveness as soon as the surface becomes smooth again.


/WORN ASPHALT AND ROUGH SURFACES

Aged tarmac exposes protruding gravel that sends direct tingling vibrations into your ankles and shins.


A 78A quad roller skate wheel wraps around these rough spots thanks to the high elasticity of its urethane. A rigid core paired with a thick 62 or 64 mm tire cushions repeated jolts on these abrasive roadways.


/COBBLESTONES

Parisian or historic cobblestones represent the most demanding obstacle for quad roller skates due to the width of the gaps between stones.


A 78A wheel in 64 mm on a Premium plate or 62 mm on an Iconic plate softens the vertical impact on flat slabs with tight joints. Skating technique completes the gear: stagger one foot forward with bent knees and maintain a speed above 12 km/h to glide over the gaps using momentum.


Crowned cobblestones with wide, deep gaps mechanically block 62 mm wheels. On these short stretches, the Flaneurz or Slades detachable system takes over: unclip your Rolling Parts in seconds to walk normally on the sidewalk before clipping back in once you reach asphalt.


/BIKE LANES

The asphalt on bike lanes offers a glass-smooth surface ideal for 80A to 82A wheels in 62 mm. Watch out for white thermoplastic painted lines and green or red resin markings at intersections.


These slick coatings reduce the polyurethane's friction coefficient, requiring you to keep your skates parallel without pushing laterally while crossing them.


/LIGHT RAIN

Wet pavement cuts a quad roller skate wheel's grip in half. If a downpour catches you mid-ride, a soft 78A compound with a wide 35 mm contact patch preserves the maximum available grip on the water film. Shorten the width of your lateral strides and anticipate braking with your toe stop.


Dust-laden water immediately penetrates inside metal bearings and triggers oxidation in under 24 hours. After riding on wet surfaces, remove your wheels to wipe down the shields with a dry cloth before applying a drop of lubricant.


/INDOOR WHEELS: WHAT HARDNESS FOR THE RINK?

Indoor skating on waxed hardwood or sports resin requires rigid quad roller skate wheels starting at 88A. On these defect-free surfaces, a soft 78A wheel sticks to the floor and locks your foot during a quick pivot.


Hardness levels increase depending on your indoor discipline. Roller dance and rink skating use 88A to 95A compounds to combine curve grip with controlled slide. Artistic skaters and rhythm skating enthusiasts choose durometers between 97A and 103A to execute precision footwork and effortless spins.


/DETACHABLE ROLLER SKATES: TWO SETS OF WHEELS, ONE SINGLE ROLLING PART

A skater wearing traditional roller skates has to choose between the comfort of street wheels or the responsiveness of indoor wheels, unless they buy two complete pairs. The detachable system solves this logistical constraint using a single pair of Shoes Only and a single Rolling Part.


You commute to your training spot on 78A or 80A outdoor wheels before unclipping your Rolling Parts at the gym entrance. Mounting an 88A indoor wheel set takes 3 minutes with a 13 mm wrench. Equip your second set of wheels with its own batch of eight bearings (8 mm axle for Slades and Flaneurz Iconic, 7 mm axle for Flaneurz Premium) so you can swap them right on the spot.


/WHICH FLANEURZ AND SLADES WHEELS FOR WHICH SKATER PROFILE?

The urban beginner or multimodal commuter prioritizes safety and stability on uneven sidewalks. The stock 62 mm 80A Slades wheel (32 mm width) included with the Slades range ensures confident handling and smooths out road imperfections during initial daily rides.


The regular skater looking for comfort on worn asphalt should opt for the 62 mm 78A Flaneurz wheel. Its soft compound absorbs vibrations in historic city centers and mounts directly onto Slades and Iconic Rolling Parts.


The experienced skater seeking speed and efficiency over long distances upgrades to the 64 mm 82A Roll Line Helium wheel. Featuring a large-diameter rigid hub, this model maximizes pace retention and mounts exclusively onto Premium Rolling Parts equipped with Roll Line Variant M or Mistral plates.


/THE 5 MISTAKES TO AVOID WHEN CHOOSING YOUR WHEELS

  1. Mounting 64 mm or 65 mm wheels onto a Slades or Flaneurz Iconic Rolling Part: any diameter over 62 mm rubs against the sole during sharp turns and stops the wheel dead.
  2. Skating in the city with 88A to 101A indoor wheels: the lack of polyurethane compression transmits every pebble straight into your joints and causes sudden slips on dusty asphalt.
  3. Confusing inline skate and quad roller skate wheel standards: a 76 mm or 80 mm inline wheel has a narrow profile incompatible with quad axles and truck geometry.
  4. Keeping wheels in the exact same position all year: the inner push wears down the front inside wheels at an angle (coning), requiring a cross-rotation every two months to maintain even cylindrical wear.
  5. Ignoring the bearing axle diameter when changing wheels: Slades and Iconic plates use 8 mm axles, whereas Flaneurz Premium Roll Line plates require 7 mm bearings.

/FREQUENTLY ASKED QUESTIONS

The Parisian road network alternates between ultra-smooth asphalt on major bike lanes and coarse tarmac interrupted by cobblestone sections. A hardness of 78A to 80A with a 62 mm diameter offers the versatility needed to absorb road roughness while maintaining a steady pace along the Seine quays.

Flat, tightly spaced cobblestones can be crossed using soft 78A wheels by maintaining a steady speed. Bend your knees with your feet staggered in a scissor stance to distribute your weight. On large, uneven historic cobblestones, quad wheel size hits its physical limit: unclip your Flaneurz or Slades Rolling Parts to walk across the section.

The maximum size depends on your Rolling Parts range. Slades and Flaneurz Iconic Rolling Parts accommodate wheels up to 62 mm in diameter. The Flaneurz Premium Rolling Parts accommodate wheels up to 64 mm thanks to their taller Roll Line plates.

Skating in the rain cuts grip on painted road markings and metal grates while exposing steel bearings to rust. On wet pavement, equip soft 78A wheels and use a narrower lateral push angle. Disassemble your bearings as soon as you get home to dry and lubricate them.

Using two separate sets comes down to the laws of friction: an outdoor wheel (78A to 82A) absorbs asphalt vibrations, whereas an indoor wheel (88A to 103A) prevents sticking on hardwood floors or polished concrete while keeping street dirt out of the rink.

The 78A durometer protects your joints on rough roads and flat cobblestones. The 80A to 82A standard in 62 mm covers the majority of daily urban commutes on Slades and Iconic Rolling Parts. Upgrading to 64 mm with an 82A hardness on a Premium plate unleashes your speed on smooth asphalt.


Discover all our Roller Skate Wheels to equip your Detachable Roller Skates and check out our Rolling Parts compatibility guide to confirm your setup.

HOW TO INTEGRATE DETACHABLE ROLLER SKATES INTO MY DAILY COMMUTE

To install this Web App in your iPhone/iPad press and then Add to Home Screen.